Electrical
Guides to recognising electrical faults, recording the symptoms and knowing when to call a qualified electrician.
Latest guides
What did the electrician actually test in your apartment?
Imagine trying to arrange a follow-up visit with just two words on the invoice. “Electrics checked.” The power may be back, yet the next electrician still needs to know where to start. Three details turn that invoice into a useful account of the work.
An RCD tripped. Is that the same as a circuit overload?
A kettle and a portable heater can ask a circuit for too much current. A damaged appliance can also let current take an unintended path. Either event can leave a room quiet and dark. The protective device sees a different electrical event in each case.
What do the two digits on an outdoor light actually mean?
Picture the spot for a new balcony light. Is it tucked beneath the slab above, or in the path of the hose used to wash the floor? Give an installer those two positions and “suitable for outdoors” becomes a much more precise question.
Water reached an electrical fitting. What belongs in the incident note?
If water is coming through a ceiling light or pooling near a socket, keep everyone clear. Stay on dry ground, avoid switches, the electrical board and wet fittings, and contact building management and a qualified electrician. For smoke, fire or immediate danger, move to safety and call emergency services.
The home office has six plugs. How much load does it put on one outlet?
Six plugs behind a desk tell you that the power strip is full. They tell you very little about the demand at the wall. A laptop charger and a portable heater each occupy one slot. The circuit experiences them quite differently.
Why do the LEDs flicker at the dim end of the dial?
One row of LEDs behaves beautifully until the dimmer reaches its last few degrees. Then the light trembles across the table. That narrow stretch of the dial tells you something a complaint of “bad bulbs” leaves out.
A brighter lamp or a warmer white? Read the two numbers separately
Read “800 lm, 4000 K” as two answers on a lamp box. The first tells you how much light the lamp emits. The second describes the colour of its white light. Which one to change depends on what bothers you when you sit down in the room.
The plug was hot. What should you tell the electrician?
A smell of hot plastic by the kettle is reason to stop using that connection. Leave the plug and socket alone, keep people away and arrange a qualified electrician. If there is smoke, fire or immediate danger, move to safety and call emergency services.
Power Out in One Room? Start With What Still Works
The bedroom light goes out halfway through getting dressed. In the hall you can still see perfectly well. Before anyone calls it a building outage, there is a useful detail to notice from the doorway. Is the bedside clock still lit?
© 2026 DENAIR. All rights reserved.
DENAIR is operated by BAFOEV TECHNICAL SERVICES L.L.C. Dubai DET License No. 1118204.