DENAIR

An RCD tripped. Is that the same as a circuit overload?

A kettle and a portable heater can ask a circuit for too much current. A damaged appliance can also let current take an unintended path. Either event can leave a room quiet and dark. The protective device sees a different electrical event in each case.

Simplified protection principles. The fitted device and its markings identify its actual functions.

Too much current

Each appliance draws current while it runs. On a shared circuit those demands add up. An overload can build while equipment stays on, and an overcurrent device can disconnect the circuit. How quickly it acts depends on the size of the current and the device.

Current that goes missing on the way back

A residual current device, or RCD, compares the current going out with the current coming back. If enough returns by another path, the device disconnects the supply. A large total load is unnecessary for that imbalance to arise.

You may see RCBO on the device label. That type combines residual-current and overcurrent protection. A tripped lever on its own leaves both explanations open.

Tell the electrician what was operating and which lights or appliances lost power together. A label you can already see from safety is useful too. Leave the cover closed and the affected equipment out of use. Repeating the trip adds risk while doing little to settle the cause.

How to read the electrician’s fault report

© 2026 DENAIR. All rights reserved.

DENAIR is operated by BAFOEV TECHNICAL SERVICES L.L.C. Dubai DET License No. 1118204.

DENAIR