DENAIR

The cartridge is the right length. Will it work in this filter?

Slide two nominally ten-inch cartridges alongside each other and their ends may line up perfectly. Now look at the ends themselves. One could seal against a flat seat while the other expects a different connection. Matching the length answers only the easiest question.

Example identifiers from the Pentair data sheet. The drawing is schematic.

Start with the name on the housing

Find the system model on its accessible label or in the installation paperwork. Then find the replacement-element identifier in the manufacturer’s parts list. For example, Pentair lists LR-1500 as a system and LR-FB10 as its replacement cartridge. Searching for just “ten inch” loses that connection.

Diameter, end shape and seal position affect whether water is forced through the element as designed. The media inside govern what treatment it can provide. Even a cartridge that seats neatly can have a different flow rating, capacity or reduction claim.

The original is out of stock

Give the supplier both identifiers and ask for a documented compatible part for that housing. Where a certified reduction matters to you, check that the proposed replacement appears in the applicable system listing.

Keep the replacement reference where you buy supplies, perhaps as a saved photo of the label. Next time you can order by part number while the filter is still assembled and working.

Match a cartridge to its certification listing

© 2026 DENAIR. All rights reserved.

DENAIR is operated by BAFOEV TECHNICAL SERVICES L.L.C. Dubai DET License No. 1118204.

DENAIR