DENAIR

Beauty Salon HVAC Fit-Out in Dubai: Plan Services and Zones

Beauty salon fit-out planning by activity, ventilation function and cooling zone

Beauty Salon HVAC Fit-Out in Dubai: Plan Services and Zones

Beauty Salon HVAC Fit-Out in Dubai: Plan Services and Zones

Beauty Salon HVAC Fit-Out in Dubai: Plan Services and Zones

Plan a salon fit-out around the services offered: define cooling zones, room ventilation, activity-specific extraction and building connections before fixing the furniture.

Plan a salon fit-out around the services offered: define cooling zones, room ventilation, activity-specific extraction and building connections before fixing the furniture.

Plan a salon fit-out around the services offered: define cooling zones, room ventilation, activity-specific extraction and building connections before fixing the furniture.

By Denis Perevoshchikov

HVAC Engineer · Certified HVAC Specialist · Manager at DENAIR, Dubai

A beauty salon's HVAC brief should start with the services offered at each chair, table and enclosed room. Hair styling, nail work and a private facial room can share an address while needing different design decisions. Before ordering equipment or fixing the furniture, give the designer an activity plan that separates cooling, outdoor air and any process extraction.


Exposed ductwork and ceiling services above an unfinished interior

Open ceiling and ductwork photographed during a DENAIR renovation-stage visit. General coordination illustration, not a salon extraction installation.

Turn the service menu into a room-by-room brief

Number the spaces on the proposed layout and describe what happens in each one. Include activities planned for opening and proposed later additions, keeping the latter clearly marked for review. A label such as “beauty room” leaves the designer guessing about the actual work.

  • Reception and waiting: expected visitors, staff, busy periods, entrance doors and nearby retail displays.

  • Hair stations: cutting, styling, drying, colouring and other specific processes; the products and equipment used at each position; and how many stations operate together.

  • Nail stations: the actual services, including any filing or product application, workstation model and proposed extraction equipment.

  • Enclosed facial or waxing rooms: declared services, normal door position, client and staff positions, equipment and operating hours.

  • Wash and support areas: hair washing, towel handling, laundry if present, product storage, cleaning and equipment-processing activities.

Supply product safety data sheets and the manufacturers' installation information for dryers, steam devices and other equipment. Describe any bath, sauna, steam room or specialised cosmetic service separately for the relevant specialist review. This brief does not establish that an activity is permitted or that a salon requires a clinical ventilation system.

Check the activity and layout requirements early

Dubai Municipality's no-objection technical requirements, Version 3, cover listed salon activities and identify furniture-layout changes and added activities among the application cases. They also distinguish services outside that department's scope and separate building approvals. Ask your appointed team to confirm the current requirements for your licence, premises and proposed services before fixing the layout.

Use our fit-out approval checklist to organise responsibilities and drawing revisions. Keep the activity review, building permissions and HVAC design decisions visible as separate tasks.

Separate cooling, room ventilation and local extraction

Ask the proposal to identify three functions for each activity: controlling room temperature, providing the intended outdoor-air and room-air routes, and capturing emissions from a process where needed. Identify which equipment performs each function. An AC grille alone does not tell you all three are provided.

The Dubai Municipality salon compliance guideline, Version 5, issued 26 March 2026, addresses exhaust in higher-pollution activity areas, giving nail care and hair dyeing as examples in section 13-1. Have the responsible designer apply the current guidance to the actual services and products. This is not a direction to fit the same extractor in every beauty room.

The guideline has a separate subsection for indoor air quality in separate buildings. Do not lift one airflow figure into a universal salon equipment order. Ask the designer to document the applicable ventilation basis and show how it is delivered to the final rooms.

Give nail-work extraction a specific assessment

Where nail work involves dust or vapour-producing processes, show the extraction specialist the working position, products, table design and proposed service. The UK HSE's SR13 nail-bar guidance, pages 1–2, describes local capture using a downdraught table or movable hood alongside general ventilation. Its advice is specific to the processes it covers; it is not Dubai legislation or a specification for every salon treatment.

Ask what the proposed device is designed to capture, how the technician works within its capture area, and where the extracted air goes. If a supplier proposes recirculation, obtain its documented suitability for the actual substances for specialist review. A product labelled “nail dust collector” should not be assumed to deal with every vapour used at the station.

Plan salon HVAC zones by activity and operating pattern

Start with the room-use plan, then ask the designer to mark the cooling control zones and the ventilation or extraction areas separately. A cooling zone describes an area controlled together. It does not automatically define a separate outdoor-air supply, local-extraction system or room-pressure requirement.

Use a zone schedule with the same room references as the furniture plan. For each area, ask the design team to record:

  1. Use and timing: the activity, normal and peak occupancy, and whether it operates independently of the main salon.

  2. Cooling arrangement: the serving equipment, any rooms sharing it, the active sensing point and the intended control response.

  3. Air routes: the identified supply, outdoor-air, return and extract paths, with normal door and partition arrangements.

  4. Workstation conditions: where clients and staff remain, concerns about direct airflow or noise, and any local-capture equipment that must be coordinated.

  5. Verification: the design criterion, planned check and person responsible for resolving an unconfirmed item.

Consider an illustrative salon with an open styling area, an enclosed facial room and a nail station. The styling area may have several dryers operating while the facial room has a quiet appointment behind a closed door. Ask whether one shared cooling control can serve those conditions, or whether a different arrangement is justified. Separately assess the nail process and its extraction. These are design questions, not a recommendation for three units or three identical ventilation systems.

For a proposed enclosed room, confirm the air routes with the door in its normal position. Use our room-by-room fresh-air guide for the distribution questions. Avoid making an open door the accidental solution to an unfinished design.

Have the controls team identify the active sensor rather than judging by the nearest wall display. For example, Daikin's BRC1E53 instructions, installation page 2, call for representative room sensing, away from sunlight, heat sources and outside-air draughts, when its controller thermostat function is used. Apply the actual equipment instructions; this is not a reason to move a controller yourself.

Resolve the extraction route before buying the furniture

If the design includes a ventilated workstation or other extract system, review its connections while joinery and equipment can still change. Ask the specialist and building team to identify the usable route, discharge arrangement, incoming replacement air and any effect on the cooling design. Keep proposed connections distinct from those confirmed on site.

The UK HSE's guide to buying local exhaust ventilation, pages 2–4, treats the capture hood, duct, fan, air cleaning and discharge as a coordinated system. It also recommends a process-specific specification, maintenance access, operating instructions and performance checks. Use these as technical purchasing questions, with the local requirements confirmed separately.

Before accepting the quotation, identify who supplies the workstation, selects the extraction, coordinates the building connection and verifies the assembled result. Ask what happens during occupied periods when cooling demand falls, and which ventilation functions must continue under the agreed design. Our fresh-air controls guide explains why the operating sequence needs its own description.

Agree the checks for the actual salon operation

Ask the designer and commissioning team to define the acceptance checks before installation. The handover plan should follow the final activity and zone schedule, rather than treating one temperature reading at reception as the result for the entire salon.

  • Check the installed outlets, workstation positions, air routes and access against the agreed drawings.

  • Record the occupied areas and operating conditions represented in cooling and airflow checks, including relevant doors and equipment in use.

  • Where local extraction is specified, request the specialist's results against its performance brief and a demonstration of correct use, checks and maintenance.

  • Identify any condition that could not be tested, the next step and who is responsible.

Keep system test records, staff operating information and the project's permission or completion records together but separately identifiable. Later changes to products, services, workstation positions or room use should be referred back to the responsible designer and specialist before assuming the original arrangement still applies.

Planning a beauty salon fit-out in Dubai? Share the proposed services, room layout, equipment list and available building-service information with DENAIR to discuss the HVAC fit-out and renovation scope. Identify any local-extraction or specialist activity assessment still needed so it can be coordinated before furniture and ceiling decisions are fixed.

Explore the relevant scope

Bring the right details to your enquiry

Bring the right details to your enquiry

Bring the right details to your enquiry

Share the equipment, the rooms affected, previous work and available access. DENAIR can assess the relevant scope.

DENAIR

HVAC repair, maintenance, installation and fresh-air work for Dubai properties.

DENAIR is operated by BAFOEV TECHNICAL SERVICES L.L.C. Dubai DET License No. 1118204.