DENAIR

How to Plan HVAC for a New Dubai Retail Shop

New retail tenant pre-design HVAC brief

How to Plan HVAC for a New Dubai Retail Shop

How to Plan HVAC for a New Dubai Retail Shop

How to Plan HVAC for a New Dubai Retail Shop

Prepare a retail HVAC brief before choosing equipment: confirm the building services, describe how the shop will trade and agree the work at each tenant-building connection.

Prepare a retail HVAC brief before choosing equipment: confirm the building services, describe how the shop will trade and agree the work at each tenant-building connection.

Prepare a retail HVAC brief before choosing equipment: confirm the building services, describe how the shop will trade and agree the work at each tenant-building connection.

By Denis Perevoshchikov

HVAC Engineer · Certified HVAC Specialist · Manager at DENAIR, Dubai

Before choosing air conditioners for a new Dubai shop, establish what the premises can provide and what your business will ask of it. A useful first brief brings the landlord's service information, your trading plan and the proposed fit-out together, before equipment orders or ceiling details are fixed.


Exposed ductwork, suspended supports and a ladder beneath an unfinished ceiling

Open ceiling and ductwork photographed during a DENAIR renovation-stage visit. This is a general coordination illustration, not a completed retail project.

Request the service information for your exact unit

Ask the landlord or building fit-out team for the current tenant manual, unit drawings and information about the services provided to the premises. Have your designer distinguish the building's original provision from equipment or alterations left by a previous occupier. A leasing description such as “central AC” is too broad to serve as the equipment brief.

Ask the team to establish these points before recommending a system:

  • Cooling provision: what serves the unit, where the connection is, and what capacity or service allocation is documented.

  • Ventilation: which outdoor-air and extract connections exist, what they serve and which details remain unconfirmed.

  • Supporting services: the available electrical provision, condensate connection and relevant controls or building-system interfaces.

  • Operating arrangement: who controls the cooling and ventilation schedules, and how proposed trading and staff hours will be supported.

  • Condition and access: what is installed, what the qualified team has checked and what still needs a survey.

There are useful published examples of this distinction. The JLT Retail Tenant Handbook, in its technical manual's “Base Building Provisions” section, describes chilled-water connection points, capacity allowances tied to Lease Outline Drawings and ventilation connections where applicable. It also calls for site verification. These are JLT provisions, not a promise about another Dubai shop. Obtain the current documents for your own premises and have the building team confirm the information the designer will use.

Describe how the shop will actually operate

Give the designer a dated layout and a short operating brief. “Retail” alone leaves too many assumptions open. Include:

  • Sales floor and staff areas: expected staff and customer numbers, busy periods, queues, fitting rooms and enclosed stockrooms.

  • Entrance: whether it opens outdoors or into an enclosed mall, the proposed door arrangement and delivery access.

  • Lighting and equipment: display lighting, illuminated signage, screens and other equipment, with supplier information and expected operating hours.

  • Daily schedule: trading, stocking and cleaning hours, including staff activity before opening and after closing.

  • Merchandise needs: any supplier-specified storage conditions or equipment that requires separate environmental control. Give the designer the actual specification.

These details support the design brief. ASHRAE's nonresidential load guidance identifies people, lighting, equipment, building exposure and outdoor air among the inputs affecting cooling demand. Ask the designer to assess your proposed use against the available service, using our cooling-load and equipment-selection guide for the calculation questions. Do not turn an early allowance into an equipment order while key inputs remain unknown.

Agree the boundary between building and tenant work

Prepare a short responsibility schedule with the building representative, designer and fit-out contractor. For each connection or shared service, record the following:

  1. The interface: the exact connection, equipment or control function, identified on a drawing.

  2. The confirmed provision: the document or site finding that describes what is available, including relevant limits and operating hours.

  3. The work on each side: who designs, supplies, connects and checks the proposed arrangement.

  4. The decision still needed: who will answer it and which design or purchase depends on the answer.

  5. The commercial scope: where any associated work or attendance appears in the quotation, and who will maintain each part afterwards.

This is a coordination record, not a default allocation of legal or financial responsibility. Confirm the actual arrangement with the relevant parties and project documents. For example, Al Ghurair Property Management's commercial FAQs direct tenants to its Retail Delivery Team for the fit-out manual and distinguish tenant maintenance from landlord services. Use your own building's information rather than copying another landlord's terms.

Include ventilation in the discussion even when cooling is the first concern. Ask which team establishes the ventilation design and confirms the usable building connections. This brief does not prescribe fresh-air rates, extract quantities or a compliance outcome.

Resolve a mismatch before fixing the design

Consider an illustrative shop that plans evening stocktaking after the building's normal cooling hours. Before selecting extra equipment, the tenant needs the operator's answer about service availability and the designer's assessment of the proposed staff activity. The result might change the operating arrangement, the design or the business plan. This is a planning example, not a DENAIR case result or a promise that additional service is available.

Use the same approach if a required connection is missing, the documented capacity has not been confirmed, or retained equipment cannot yet be assessed. Put the question and the affected commitment on the open-items list. Ask the responsible team what can be priced provisionally and what must be resolved before ordering.

When the service brief is settled, coordinate the layout with the actual routes and access. Our ceiling-space survey guide covers that separate feasibility check. Use the fit-out approval checklist to organise the project-specific permission review with your appointed team; this article does not establish an approval route for every Dubai shop.

Give every bidder the same agreed brief

Send the current layout, operating brief, confirmed building-service information and responsibility schedule together. Mark unanswered items clearly and ask each contractor to state the assumptions behind its proposal. Then use the installation quotation checklist to compare the equipment, work and exclusions on the same basis.

Keep the later milestones separate. The commercial start-up checklist covers readiness for operating tests, while the installation handover guide covers the records and demonstration to request. Neither replaces confirmation that the original shop brief can be supported.

If the concept includes cooking, clinical treatment or another activity needing specialist environmental or exhaust design, identify it at the start and obtain the relevant specialist assessment. A general retail brief does not settle those requirements. Leave ceiling access, electrical checks and service connections to qualified personnel.

Planning a new shop? Share your proposed layout, business use and available building-service information with DENAIR to discuss the HVAC fit-out and renovation scope. Tell us which service details are confirmed and which still need coordination with the building team.

Explore the relevant scope

Bring the right details to your enquiry

Bring the right details to your enquiry

Bring the right details to your enquiry

Share the equipment, the rooms affected, previous work and available access. DENAIR can assess the relevant scope.

DENAIR

HVAC repair, maintenance, installation and fresh-air work for Dubai properties.

DENAIR is operated by BAFOEV TECHNICAL SERVICES L.L.C. Dubai DET License No. 1118204.